M2 medium installation
 

I have searched but didn't find what I was looking for.

I have read that people have trouble with the M2 large intercooler install, as they have to lower the radiator, etc for the duct to fit, but what I want to know is if people have the same problem with an M2 medium.

My battery has been relocated, and I am going single, so no air box to bump it either. I was just curious if I still had to lower my radiator, etc.

Any help would be greatly appreciated.

Sometimes you do, sometimes you don't. Depends on the type of radiator you have.

It depends on which radiator you are running. Stock will fit fine, but if you have almost any aftermarket, you might have to lower it a little.

I forgot to mention that I do have an fluidyne...so, it looks like I will have to see if I have to lower mine.

thanks for the input.

Try this https://www.rx7club.com/showthread.p...light=radiator

If that doesnt help post here or PM me with any questions you have. I believe the medium and large IC duct are the same for both units.

2 rotor,

Thanks. I had already looked at that thread, but I wasn't sure if the large and medium ran the same ducts. Thanks for the help.