RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   M Spec FMIC from rx7store (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/m-spec-fmic-rx7store-883705/)

lunarfault 01-22-10 09:04 AM

M Spec FMIC from rx7store
 
Has anybody ever used the Greedy M Spec FMIC nock off from rx7store.net? If so could you tell me how the product worked out for you and the installation design. I am looking for a FMIC that is good for the stock twins running at 1bar and hides in the bumper.

http://www.rx7store.net/product_p/fmicmspec.htm

Mahjik 01-22-10 10:16 AM

It's just a replica of the short-lived MSpec. It's probably using a similar bar and plate core as the MSpec did which has it's pros and cons to the tube and fin design. I doubt you'd notice a difference.

EviLPeNeviL 01-22-10 10:30 AM


Originally Posted by Mahjik (Post 9754732)
It's just a replica of the short-lived MSpec. It's probably using a similar bar and plate core as the MSpec did which has it's pros and cons to the tube and fin design. I doubt you'd notice a difference.


Speaking of which, was there a reason for the real GReddy MSpec IC to be short lived? Pricing? Efficiency? Quality?

Deals Gap Rotary Rally 01-22-10 10:43 AM


Originally Posted by lunarfault (Post 9754608)
Has anybody ever used the Greedy M Spec FMIC nock off from rx7store.net? If so could you tell me how the product worked out for you and the installation design. I am looking for a FMIC that is good for the stock twins running at 1bar and hides in the bumper.

http://www.rx7store.net/product_p/fmicmspec.htm

You say 'hides' in the bumper.. I'm not sure if you seen these installed, but they don't quite 'hide' behind the bumper.

Man, these things are CHEAP!! I had this and paid well over 1200.

I would go with upgraded SMIC instead of FMIC for 14lbs. I have a SR SMIC forsale :)

XLR8 01-22-10 10:51 AM

I too am curious about this intercooler. I believe I saw an install thread & review posted not so long ago, though it could have been in the single forum. Try searching. There should be some good info.

Jason 01-22-10 05:42 PM

Its a popular upgrade and comes with the same hardware as the Greddy intercoolers. Install is not bad but you do have to remove the bumper and trim the rebar. I typically recommend that you do a radiator upgrade at the same time.
If interested give me a call or email and I will give you rx7club pricing on it which will save you some money.

Ratjar 01-22-10 06:01 PM

...I should buy one

2RotorsNaDream 01-22-10 10:19 PM

Its the exact same thing as the Greddy one. I bought the Greddy one and my friend has the knockoff and the installation is the same, and I dont notice any difference in performance at all. Go pick it up.

Ratjar 01-23-10 12:08 AM


Originally Posted by 2RotorsNaDream (Post 9756218)
Its the exact same thing as the Greddy one. I bought the Greddy one and my friend has the knockoff and the installation is the same, and I dont notice any difference in performance at all. Go pick it up.

I see...

MR_Rick 01-23-10 08:41 AM

When i had my Greddy one, the main thing I notice was more turbo lag. I'm not sure about performance since did a few other upgrade at the same time.

lunarfault 01-23-10 11:27 AM


Originally Posted by Jason (Post 9755735)
Its a popular upgrade and comes with the same hardware as the Greddy intercoolers. Install is not bad but you do have to remove the bumper and trim the rebar. I typically recommend that you do a radiator upgrade at the same time.
If interested give me a call or email and I will give you rx7club pricing on it which will save you some money.

I am very interested in it but the upgrade is a couple months away. Already have the radiator upgrade so that's not a problem. Just have to relocate the radiator to stand up.

Thanks everybody for their input.

Kman Art 07-08-10 11:13 PM

I'm at my shop trying to install this FMIC without instructions. Jason, I will be calling you in the morning if I can't complete this and the radiator upgrade.

I guess I should have mentioned I would have needed instructions to install this setup huh?

Kman Art 07-09-10 01:20 AM

http://greddy.com/upload/file/12050054,55_i.pdf

Jason 07-09-10 10:31 AM

I was just going to post that link :)

kgriffin 07-09-10 02:12 PM


Originally Posted by Jason (Post 10100970)
I was just going to post that link :)

me too lol

linnadawg 07-09-10 03:01 PM

I dont know if theres any difference in the one on ebay but it comes with all the same hardware and its only like 200$

zack4173 07-09-10 03:51 PM

I installed this intercooler on my car last summer with a radiator upgrade as well and it has performed great for me.

Kman Art 07-10-10 09:12 PM

Did any of you have problems with the air condenser brackets? I pretty much had to modify/fab four mounts out of the supplied material to get it bolted up properly.

Oh yeah, Jason, those samco rad hoses you sent me were wrong. Kinda sux too cause I had to pay 27% duty to customs, on top of what you guys charge, to get the wrong parts.

Jason 07-10-10 11:39 PM

Read the directions. You have to cut the radiator hose to work with that intercooler. Nothing wrong with the Samco hoses you got. Nobody makes a radiator hose kit that works exactly with that intercooler.

Kman Art 07-11-10 09:40 PM


Originally Posted by Jason (Post 10103625)
Read the directions. You have to cut the radiator hose to work with that intercooler. Nothing wrong with the Samco hoses you got. Nobody makes a radiator hose kit that works exactly with that intercooler.

Those radiator hoses look nothing like the stock parts. I understand the need to cut the stock ones, but samco set doesn't look like they would fit even with the cutting.

Indian 07-11-10 10:20 PM

They will fit with some cutting. The instructions tells all.

Jason 07-12-10 08:48 AM


Originally Posted by Kman Art (Post 10104890)
Those radiator hoses look nothing like the stock parts. I understand the need to cut the stock ones, but samco set doesn't look like they would fit even with the cutting.

If you can send me a pic of the hoses and I can see what you got. I typically only stock the FD hose so if you got something different I'm not sure what it would be.

Thanks

Black Hearts 07-12-10 10:58 PM

http://img821.imageshack.us/img821/4104/img0017u.jpg

Uploaded with ImageShack.us

heres an old pic of said hose. never noticed any leaks or performance reduction.

Kman Art 10-12-10 01:40 AM


Originally Posted by Jason (Post 10105417)
If you can send me a pic of the hoses and I can see what you got. I typically only stock the FD hose so if you got something different I'm not sure what it would be.

Thanks

Hoses turned out to be the FC model. Everything else finally went together. AC blows cold too.

Now on to more threads to finish going through the car.

Supernaut 10-12-10 01:25 PM

Thanks for the update!

papaupa 10-12-10 02:11 PM


Originally Posted by linnadawg (Post 10101423)
I dont know if theres any difference in the one on ebay but it comes with all the same hardware and its only like 200$

i think the one that is on ebay for 200 something is 2.5 inches while the ones that is 300 or more is 3 inches. The 2.5 inches would work?


All times are GMT -5. The time now is 05:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands