RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Lug Thread Size (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/lug-thread-size-107451/)

bhodge

08-20-02 09:10 PM

Lug Thread Size

I was just wondering if anyone knew the lug size and thread type. I have two cross-threaded lugs on the driver side rear wheel that I was going to try to chase with a die before I go through the enormous ordeal of replacing the studs. I am going to borrow a thread gauge tomorrow and I just wanted something to compare to. Thanks in advance

rynberg

08-21-02 02:14 AM

I believe its 21mm.

duboisr

08-21-02 02:29 AM

21MM WAY OFF try 12mm dia 1.50 mm pitch you can pull the rear and remove the hub with out special tools in about 1 hr The tire store stripped one of garfinkles 2weeks ago he replaced the stud in about 1 hr he was mad that used an air tool on it

rynberg

08-21-02 02:31 AM

Quote:

Originally posted by duboisr
21MM WAY OFF try 12mm dia 1.50 mm pitch you can pull the rear and remove the hub with out special tools in about 1 hr The tire store stripped one of garfinkles 2weeks ago he replaced the stud in about 1 hr he was mad that used an air tool on it

I thought he was referring to the lug nuts, give me a break, it's late and 6:30am is going to come way too soon.

bhodge

08-21-02 04:51 PM

duboisr - You were right on. Believe it or not, I got lucky for once and the tap and die worked. Ordered some lugs from Mazda just in case. Thanks for the help.

All times are GMT -5. The time now is 02:43 AM.