looking for the bushing thread
 

I did a search but for the life of me I cannot find the thread I saw on here a few months back. It was a detailed instruction on replacing the bushings on the 7. It used a 12 or 20 ton press and listed all the tools/equip you needed to replace all the bushings. I just got the group buy for the delrin bushings and the 6 pillow ball ones and a 12 ton press. If somone could point me to that thread I would be grateful as my search results pointed to many other threads, including Dale Clarks, but not the one about using the press and the tools required.


Sorry for the run on.

-Shogun

I chased my ass trying to find my rear end clunk for awhile. Turned out to be one of the two where the trailing arm meets the lower control arm. There's one where the trailing arm bolts to the lower control arm, and one right next to it where the spindle bolts to the lower control arm.

Replaced the trailing arms thinking it was the one at the front of the arm, but was one of the other two.

Thanks a lot dgeesman that was exactly the thread i was looking for!

-Shogun