RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Just ordered my RB dual-tip! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/just-ordered-my-rb-dual-tip-277700/)

EdwardNorth 03-01-04 03:54 PM

Just ordered my RB dual-tip!
 
I ordered one from the RX7store. I was planning on buying the S03's on before anything else, but I'm sure it will still be a couple weeks or more before I can safely wake up the 7 and take her for a salt-free spin. I will have enough saved by then and I won't really drive the car hard at all until I have used up most of my tank full of 4-month-old Sunoco 94 w/sta-bil and gassed up with a fresh load!

I'm looking forward to a couple things here --

#1 - Making the neighbors happy, avoiding tickets, and being very "stealthy" on the road. With my mufferless straight-pipe that I have on there now, it is just way too loud and now that the DP is on there as well, it almost sounds like a toilet gargling at idle! :p: I would HOPE that with the RB dual, especially considering me doing a hi-flow in a few months instead of a MP, I will retain a nice quiet sound at idle so's I don't have to worry about annoying anyone in my neighborhood ever again. This is especially important because I like to sometimes leave at midnight (or later) for a Friday/Saturday night cruise.

#2 - It's sleeper time, baby! I look forward to returning the car to a completely stock look. I just hope the RB logo isn't too visible. I've seen some pics of them white and some without any white lettering, do you add the white yourself or did someone just strip it off? One way or another though, It will look sweet!

I should have it in a couple days, I guess I have to order the bracket from Mazda but I plan on doing the install this weekend.

I guess my only REAL question is, are CB installs pretty easy for someone who has done both a DP install and Fuel Filter replacement?

Thanks guys!

tobecontinued 03-01-04 03:58 PM

If you installed a dp, a cb will be a breeze. this link is to my photo album here, i got a pic of the rb dual close up, let me know if you have anymore questions. BTW great choice!
bill
https://www.rx7club.com/photo/showph...cat=500&page=1

Azaka 03-01-04 04:19 PM

Mine looks different than that. I got my from rx7store in a group buy and it looks like this:
http://www.brentroad.com/photos/00189466.jpg

I got it about 3 months ago maybe.

I love mine, it sounds much better than the HKS I had on it before (and looks a lot better than the 5" tip did).

You won't be disappointed.

tt2323 03-01-04 04:25 PM

The only real pain is un doing the hangers..have some lube on hand :)

Azaka 03-01-04 04:33 PM

You had to undo the hangers? I just slid the old HKS out of them and slipped the RB right in without any problem. The only problem I had was the RB used the stock mounting bracket that I didn't have because the HKS didn't use it.

tobecontinued 03-01-04 06:38 PM

I think you can get it with the white or the etched logos( if i recall mine is "white" on the other tip. I ordered from rx7 store about a year ago.

RX7Wishing 03-01-04 07:03 PM

i have the RB dual tip... i love the exhaust note!!! :D

BlameCanada 03-01-04 08:07 PM

I have the RB dual, with a dp and resonated mp. Its quiet at idle, almost non-existant cruising at 3k and sounds really good at W00t. Nice and deep :) But the white lettering is on the other tip, on the inside so you cant see it. I guess RB fucked up and put the right tip in the left position?

bajaman 03-01-04 08:15 PM

Mine looks just like Azaka's, but on the car you can't really see the logo. It doesn't look "ricey" at all, regardless.

I was really impressed with Racing Beat, but then they HAVE to be one of the oldest rotary guys around. I well remember they were like the ONLY one when I bought my FC new in '86. The Rotary Rocket magazine had all sorts of good stuff to say about them, even back then.

rx7girlTK 03-01-04 10:05 PM

anybody have a sound clip of it on thier fd?

Recipe7 03-01-04 10:10 PM

i will make a movie soon, but i wont have anyone to host it =\

here are some pictures of it before i installed it though =D

http://us.f2.yahoofs.com/users/402ec...S3ARABYd1Qhb1z

http://us.f2.yahoofs.com/users/402ec...S3ARABqapYH75_

http://us.f2.yahoofs.com/users/402ec...S3ARABeXDYilhU

i hope they work

apneablue 03-01-04 10:16 PM

I could have done it but my local mechanic did mine for $20 buck. was installed in about 15 minutes.

pito13b 03-01-04 10:21 PM

Here is a quick vid. I think its loud, but its alot better than some other mufflers out there. Non-Seq, DP/MP also has plenty to do with it. I like the tone though. Gets ALOT louder when I hit it.

http://files.bluefire.org:2003/MVI_0365.AVI

pito13b 03-01-04 10:21 PM

Bleh. Double, sorry.

EdwardNorth 03-01-04 11:03 PM

Thanks for the replies, guys. And thanks for the vid! It sounds REALLY nice! I couldn't hear it at all when the revs dropped between shifts, but it has a very deep and crisp hum to it when you are accelerating normally.

I imagine starting the car up for a few minutes and letting it cool down for a few minutes will never be a problem for neighbors now, noise-wise.

I can't wait!


marix1521 03-02-04 12:53 AM

thanks for that sound clip man! i've been dying to hear the RB dual tip in action. that's what i'm going with when i get the money for an exhaust. does anyone else have vid's of it?


All times are GMT -5. The time now is 03:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands