Intake suggestions
 

I'm looking into buying an intake that would work well with the vmount IC/Rad setup anyone have any suggestions as to which intake i should be looking at? or like just good Intakes in general?

I believe the RX7 Fashion Cold Air Intake is small enough to work for something like that:

http://autoparts.zoovy.com/product/1004

Or you could do what I did and buy a K&N universal dual oval flange. Insert two metal pipes and hook it directly onto the intake pipes. I think it cost me about 35.00. It looks good and works good.

Rotary Extreme is now making one out of aluminum and it will work with their v-mount setup with some extra ductwork (and all by itself for traditional applications). They will feed the airbox thru the nose of the car along with tir IC and radiator.

That's nice! Kinda pricey though.... :(

Expensive? If someone is going to shell out about $3000 for a V-Mount IC/Rad solution, why skimp on the intake after that?

I'm not getting a $3000 vmount, so $550 intake is expensive to me. :D

Exactly, so if you look at the original question, the person was asking about a good intake to work along with a V-Mount IC/Rad.