RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Injector Question? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/injector-question-441083/)

DVSseven 07-07-05 10:46 AM

Injector Question?
 
Does Anyone Know What The Pattern Of The Stock Injectors May Be. As In At What Rpm's And/or Lbs. Of Boost Do The Secondary Injectors Come Online With The Primaries?

HAI-TEK7 07-07-05 10:59 AM

i think the 2ndaries come online about 4000rpms, no matter what boost. unless you go stand alone then you can set it for whenever.

rynberg 07-07-05 11:20 AM

No.

The secondaries come online only above 2750 rpm whenever the primary injector duty cycle exceeds a certain percentage. I don't know the percentage, however, given how other things are setup, I would guess when the duty cycle exceeds 50% on the primaries. So the boost pressure that this occurs at will vary by rpm.

HAI-TEK7 07-07-05 02:00 PM

Not saying that you are wrong, seem to be a right answer. i just remebered i was on rx7.com website messing with the fuel calculator and it said bigger 2ndaries my cause stumble on 4000 rpm when they come online

DVSseven 07-07-05 02:16 PM

Rynberg, That Sounds About Right From What I Recall. Im Just Trying To See If My Problem That Im Having Is Injector Related....

DigDug 07-07-05 02:32 PM

Yeah, it's 2750RPM, but load is taken into account by the ECU.

villision 1revin7 07-07-05 11:21 PM

on the stock ecu the secondaries come on about 3700 rpm

rynberg 07-08-05 12:10 AM


Originally Posted by villision 1revin7
on the stock ecu the secondaries come on about 3700 rpm

WRONG. Read above. Geez.

DVSseven 07-08-05 01:29 PM

Does Anyone Really Know....

DigDug 07-08-05 02:19 PM

Yeah, on the stock ECU, they won't come on until 2750RPM. As Rynberg said, the ECU switches them on when the primaries hit a certain duty threshold.

They don't simply come on at a certain engine speed. When the engine has exceeded 2750RPM, AND the primary injector duty has exceeded a preset limit, the ECU starts using the secondaries. So the actual engine speed at which the secondaries start spraying depends on load.


All times are GMT -5. The time now is 04:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands