RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Idle is too low 540rpm... (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/idle-too-low-540rpm-172908/)

WanKeL FD RX-7 04-02-03 04:45 PM

Idle is too low 540rpm...
 
I have an 93 Touring, and my idle is too low, i think it should be around 700-800 rpm right ? I have the peter farrell ecu, how could i ajust the idle ?? Thanks Guys


Max

Trexthe3rd 04-02-03 04:53 PM

The air bleed screw is right under the intake elbow. there is an access hole there. Use a small flat screw driver to make the adjustment. Turn it ccw gradually until the idle reachs specified level. Do this when the car is warm.

skunks 04-02-03 04:57 PM

you can also increase idle by the set screw with the nut on top of the throttle body, much easier to get to.

WanKeL FD RX-7 04-05-03 10:42 AM

Ok thanks guys ! I'll try this out

Max

Kiflin 04-05-03 12:02 PM

Good posts, I never knew any of that.

xstacy7 04-05-03 12:56 PM

learn something new everyday


All times are GMT -5. The time now is 04:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands