RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   idel w/o airpump (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/idel-w-o-airpump-65611/)

Zoomspeed 03-27-02 02:50 PM

idel w/o airpump
 
Is there any way to get rid of the rough idle you get after disconnecting the air pump?

KZ1 03-27-02 03:18 PM

take some fuel out at idle.

ejmack1 03-27-02 03:18 PM

ummmm.... nver had to do anything... .i know im runnin rich as hell though.... so i dont know

Quillo555 03-27-02 03:19 PM

Hmm.. make sure that your idle control sensor is properly plugged in. It is one of the sensors directly undeneath and plugged into the upper intake manifold. Also, make sure that your idle adjustment screw is in the right place. Aim for 900 RPM or so. Also.. what kind of computer do you have. If you have something like the power FC, then it will eventually learn the idle, and it will be fine after a while. One more thing, does the idle get better or worse as the car warms up? Well.. I hope this helps.
-Quinn

wonder1and 03-27-02 03:27 PM

Did you make sure to plug the tube that leads to the exhaust (at back of lower intake manifold by firewall)?

Zoomspeed 03-27-02 04:08 PM


Originally posted by wonder1and
Did you make sure to plug the tube that leads to the exhaust (at back of lower intake manifold by firewall)?
I havn't removed the pump yet, just unplugged it.

I adjusted my idel a bit and everything seems ok.

Thanks guys


All times are GMT -5. The time now is 08:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands