RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   IC Air intake temperature comparisons (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/ic-air-intake-temperature-comparisons-274505/)

1FooknTiteFD 02-22-04 03:52 AM

IC Air intake temperature comparisons
 
Ok guys, just wondering what type of air intake temperatures you are seeing on your Power FC's (assuming you have one) and what type of intercooler are you running. By Air temp, I mean just cruising on the freeway doing 70-80mph not neccessarily full blasting.

For the record, I have a PFS race IC and I get about 25 degrees celsius on a cool day or usually low 30's

spoolin93r1 02-22-04 04:12 AM

on the highway, i'm usually 2-5*C higher than ambient. there was a few occassions when it was really cold that it was the same temp. i have an apexi fmic if it helps any. and i also have my temp sensor in my greddy elbow

Tim Benton 02-22-04 01:37 PM

need alittle more info do draw any comparisons. what outside temp is the 25C taken? If it's in the stock position, the air temp sensor heat soaks and isn't worth much except on long drives like your talking about so that it doesn't heat soak as much. Doing like spoolin did and relocate it to the elbow helps with the heat soak issue.

Tim


All times are GMT -5. The time now is 05:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands