i got problem!!
 

:confused: I need the best guy to work on my car...i can do alot of things but i need help. I want to do a street port on my 93 but i dont know who to go to? I live in northern virginia. My rx7 is stock right know, but i want to get it to 350 hp thats it. Any more suggestions how i could do that without breaking my piggy bank....Thanks

Re: i got problem!!
 

:rofl:

Does your car have the reliability mods done yet?

i'm going to be getting an rx in a few months, what exactly are the reliability mods?

I would probably contact a tuner for the streetport etc, and see if it'll pay to have you do it yourself or not. lost boi do a search for reliability mods and you'll find them..

You should do a lot more research before you just go buy an FD.

http://www.scuderiaciriani.com/rx7/buying.html

http://www.scuderiaciriani.com/rx7/reliability.html

It's not a car for everyone....

Re: i got problem!!
 

Doesn't everyone want the "best guy" to work on their cars? You may want to look in regional area of the forum for a vendor near you.

Re: Re: i got problem!!
 

no...no mods yet, i just recently bought it last june. Had some problems...i have done nothing because i wanted a 7 so bad after i was stationed in okinawa because i got totaly spanked buy one. I had a slightly modified Silvia, s13. He had a 99...evolution type r somethin somethin. But the point is i had to buy one. So i rushed into it..now i got a whole mess of problems so i need someone who is close buy to washington dc to work on it. :(

you should stop by CARRSS (804)254-2679 , and give
Donnie a shout. Its located in richmond. good luck

Here is also another good site to look at to research how to purchase an RX7


http://www.rx7turboturbo.com/robrobinette/