RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   I am missing 2 nuts (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/i-am-missing-2-nuts-636378/)

calculon 03-26-07 11:31 AM

I am missing 2 nuts
 
That's right, I have been emasculated, I am missing not one, but both of my nuts. . .

you know, the castle nuts that go on the tie rod ends with codder pins.

If anyone could help me out with my problem, I will be forever endebted. Please just post or PM me if you have an extra set you will sell me, or if you know where to source them other than a stealership.

Thanks
ryan

dgeesaman 03-26-07 11:58 AM

I hope you're not driving the car. One good bump and your wheels will be pointed in different directions.

What's wrong with buying one from the dealer? This is pretty important stuff, after all, and there are only two nuts to buy.

Dave

209FD 03-26-07 12:16 PM

lol..... i felt bad for you for a sec. Most hardware stores sell castle nuts, check a local one out and if your lucky they'll have metric ones.

calculon 03-26-07 01:12 PM

no. . .absolutely not driving it. . .i'm only half-retarded

yeah, i figured i'd go checkout the hardware store. . .anyone know the specs by chance?

thanks
ryan

Davin 03-26-07 04:55 PM


Originally Posted by big_rizzlah
no. . .absolutely not driving it. . .i'm only half-retarded

yeah, i figured i'd go checkout the hardware store. . .anyone know the specs by chance?

thanks
ryan

get stainless steal 10.9 with a zinc coating

Heisenberg 03-26-07 05:11 PM

I can tell you they are factory part number 99924-1201 and retail for about 3 bucks each if you want to go that route.

calculon 03-26-07 05:22 PM

appreciate it. . . i guess i should've called the dealership at least. . .i just assumed it would be inordinately expensive for no good reason. . .i guess 3$ for nut is ridiculous, but oh well, only 6 bucks

again thanks
ryan

chinaman 03-26-07 05:52 PM

That's right, I have been emasculated, I am missing not one, but both of my nuts. . .

Thanks
ryan
__________________
1993 CYM stock-port 20B (C171) with GT4202R, Haltech e11v2, too much fuel, LS1 coils, ACT clutch & flywheel, Stock FD Transmission and Diff




Look in your pants!!


All times are GMT -5. The time now is 04:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands