How long should I warm up my car?
 

How long should I warm up my car? Everyday, I use at least 5 min to warm up my car. Is that right?

Well I guess that really depends on how cold it is. I like to start the car and let it idle for about a minute or two until the temp guage just starts to move past the C. Then I start driving, but I stay off the boost. Once the car is up toward normal operating temp then I gradualy start to get on the boost. That's what works for me.

As soon as the car drops to normal idling RPM you're good to go.
Just sitting there idling will slow the warmup time.
After you've got the car moving, don't exceed 4,000 rpm until the water temp is up to normal.

That;s what I like about my PFC... I usually wait to 81C..if I am in a hurry and in the mid 70 C..then I stay off boost and below 3K rpms...

Yup, gotta love the PFC i just wanted to say that when the stock temp gauge first climbs to its normal position it really isn't. I see temp readings on the PFC as low as 60 deg when the gauge in the dash is in it normal position.

don't wait so long for the car to warm up
 

It is false info to say you have got to sit there and let the car idle until it is warm. The 13B-REW is no different internally really than other rotaries (I'm not talking about little details)

Start it up and let it idle for about 10-20 sec and your off, keep out of serious throttle until the car is fully warmed up and don't rev it excessively. You just need to let it run for the oil pressure to come up, that won't even take 10-20 sec.

Jeff
Rotary since 1990.
Highest mileage car was an 87 sport with 177K miles (sold it) on the original motor, no extended warm up period.

I normally let mine warm up untill the idle smoothes out and the factory temp gauge just moves above the c. i do believe it is important to let any car warm up esspecially a rotery.

I know this dosnt have anything to do with the subject but im kind of new to writing here evan though iv been reading here for quit some time. How the hell do i get my sig to come up with my mods. thanx whoever.



(i wrote this)
93 black base
t-78 single
street port
3mm seals
haltech
17"volk te37 bronze
and alot of other stuff