Gorgeous pics!
Stock, well mantained and good conditioned VR FD... I love it!
And I love this red black combo...
away-from-rice-just-performance look...

Thumbs UP!

 

BTW, where's your front tire inner thread?

How much front camber are you running? Looks like almost no positive camber at opposite lock... niice :-)

 

The suspension is stock 93 base. I need to change it out.

 

It just looks like floor dust settled on the outside portion of the tire.

If the inner portion is indeed bald I would verify the toe settings before anythign else.

 

How do you guys get your cars up on ramps. There is no way mine will make it up the ramps I got at Autozone. It's too low.

So, what I did was make some small "ramps" out of a few pieces of half inch thick plywood on top of each other. They basically look like this

=========
==================
=========================

I'm sure you guys get the idea...

 

I guess you can do it with plywood. I just went out to Lowes and purchased several pieces of wood. Then I laid them out and cut off the ends so that I had a pattern very similar to yours. I then used a few long screws and screwed them together. This way I just have to grab the whole assembly and I don't have to worry about the boards slipping when I am driving on them.

- Cody

 

opps, yeah

 

Is synthetic oil bad for a rotary? My engine is basically stock. What brand and weight of oil should I use?