Horn Beeps, Lights & signals flashes
 

:(Hey guys,

Suddenly 2 days when i wanted to start my FD, i put the key into the ignition, put it on ON, the car goes crazy, beeping and flashing headlights and bumper signals...!!! I tried overriding it by starting the car but even though the car won't start and still doing it's craziness.
So, i went and pulled the neg plug from the battery for few mins then plugged it in again and started the car fine, but then it happened AGAIN! to me last night and did the same process.

It wasn't acting like this last year, as this year i had my engine pulled out of the engine bay to replace the stock turbos with another ones, since then this habit came up!

I bet it's the Security Alarm System!!!

Can anyone please tell me why is it doing this and how to solve it? Pleeeeeeeeeeeeeease? :(

it's really annoying...

Thanks,

it is the security alarm. umm for me once it goes off i step outside the car, lock the car, then unlock it. then the alarm turns off and i enter the car and start up like normal process.

I disabled mine. It's two plugs behind the driver side kick panel. I was stuck at Walmart with it going off. And my door lock broke on one side and the other side alarm wires were disconnected from the other lock when I had to remove the broken key from the previous owner.

Yeah... it is the Alarm System...
And today once i unlocked the driver's door the alarm went crzy again and never went off!!! :(
even if i lock the door, still the alarm is on!!! till i disconnect the negative battery plug.

I want to remove and disable the guddamn alarm system, i don't want it :(, should i remove the relay which is next to the dead pedal on the left?

Theres two plugs behind the driver's side kick panel. Refer to this thread.

Disable The Factory Theft Alarm

If your car is RHD then it'd be the passenger side. At least that's what I assume.

No Images :(, it would've been better with images, Thanks a lot Anyway.
I'll try doing this.

Thanks :nod:

I checked and i saw one white wire coming from the door handle which is cut already...
?????

That's basically why mine doesn't disable the alarm. The link describes the harnesses that you need to find. I was able to do this in the dark so if you just disconnect those harnesses you're good to go. My car has been fine since I've done this.

You mean those two white connectors, next to the dead pedal on the left, next to the Green Door Lock module box, upper one is 8 pin, lower one is the 20 pin?