hood lift/strut suggestions?
I'm disabled & would like to make lifting the hood a bit easier.. can anybody recommend a specific hood lift/strut setup? (preferably bolt-on, stock hood) Thanks in advance! :)
|
Got mine off of ebay.
Works fine. |
Got a link or is it just a random kit? Having not really dealt with struts much I wasn't sure if you needed to take into account hood weights/anything technical. I suppose I'll snag this one if not..
|
|
|
Originally Posted by masonholmes
(Post 10673210)
Got a link or is it just a random kit? Having not really dealt with struts much I wasn't sure if you needed to take into account hood weights/anything technical. I suppose I'll snag this one if not..
|
The hood mount that comes with the ebay kit mounts at an angle and doesn't look as good. |
Originally Posted by thetastelingers
(Post 10673245)
Yeah these will fit better.
The hood mount that comes with the ebay kit mounts at an angle and doesn't look as good. |
Originally Posted by masonholmes
(Post 10673262)
I guess that's where the extra $100 goes, heh. Oh well.. gotta be able to get under the hood easily! (and of course want something that looks nice as well)
|
The Rotary Extreme hood struts don't corrode like the cheaper ones.
Jack |
I believe EVO-R has them. I was just looking the other day
|
Great, thanks again guys! Ooh, and I think I'm gonna grab this set, maybe in CF since they're still cheaper than the Rotary Extreme's. (and I expect to also be of excellent quality) :icon_tup:
http://www.evo-r.net/product/damper/FD3S/index.htm |
I'm runnning NRG struts. Ordered half-pressure due to my CF hood.
|
Originally Posted by RCCAZ 1
(Post 10674797)
I'm runnning NRG struts. Ordered half-pressure due to my CF hood.
|
Not sure on the hood weight. Has more to do with warnings that come on the standard shocks that say they are NOT to be used with CF or fiberglass hoods. Plus, the standard full pressure gas shocks have been known to "bow" hoods when attempting to close due to the stiffness of the shocks. Just an FYI!!
|
Originally Posted by RCCAZ 1
(Post 10675068)
Not sure on the hood weight. Has more to do with warnings that come on the standard shocks...
I'm in a wheelchair & may need to fashion some sort of grab-strap in order to reach the hood after it's fully open. Does anybody think attaching such to the factory hood catch is a bad idea for any reason & should I aim for a specifically heat resistant material? (since it gets like a bajillion degrees under there :tonque:) |
Originally Posted by masonholmes
(Post 10675077)
Gotcha & thanks for the info. The possibility of a CF hood is a ways off & I've gotta be able check the fluids NOW, so I suppose if I ever swap, I'll just have to swap struts too.
I'm in a wheelchair & may need to fashion some sort of grab-strap in order to reach the hood after it's fully open. Does anybody think attaching such to the factory hood catch is a bad idea for any reason & should I aim for a specifically heat resistant material? (since it gets like a bajillion degrees under there :tonque:) I'm not sure about attaching a strap to the hood catch. It may have the possibility to get caught up in the latch mechanism. Every time you open it you can hang something with a hook from it like a bungie cord. |
Originally Posted by Turk82
(Post 10675291)
...I'm not sure about attaching a strap to the hood catch. It may have the possibility to get caught up in the latch mechanism. Every time you open it you can hang something with a hook from it like a bungie cord.
|
Originally Posted by Trout2
(Post 10674224)
The Rotary Extreme hood struts don't corrode like the cheaper ones.
Jack I concur. The cheap Ebay ones rust, and fail. Just spend the money on a good set. |
Why do you need to change the strut pressure for the hood? Isn't the strut extension limited internally? I wouldn't assume that the strut extension is determined by the pressure. I would appreciate anyone's insight who actually knows, for a fact. Thanks! :-D
|
Originally Posted by nashman69g
(Post 10676202)
I concur. The cheap Ebay ones rust, and fail. Just spend the money on a good set.
|
I guess nobody has their hood struts? I've ran into some rather negative opinions regarding some of their other parts, on this forum. Would hate to drop $90 on their basic set if they're no better than what ya get on Ebay for $50. (and that I've been warned to stay away from)
|
To the best of my knowledge they source the majority of their parts from the same factories in China as the Ebay vendors and slap their brand on it. Something to consider.
|
Originally Posted by Gringo Grande
(Post 10688929)
To the best of my knowledge they source the majority of their parts from the same factories in China as the Ebay vendors and slap their brand on it. Something to consider.
|
Originally Posted by masonholmes
(Post 10689000)
That's sorta what I was afraid of & why I bumped/re-asked. Right now there're more important things to address, but I've gotta be able to pop the hood. Maybe I'll try Evo-R's & just upgrade later if they don't hold up..
|
All times are GMT -5. The time now is 01:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands