HELP!! Wire question!!
 

Hey guys I need some help here. I need to know what wire links the two harnesses in the engine bay together. I'm working with a harness thats all ripped apart. I looked at all the wiring schematics but they are unclear. There is supposed to be a wire from the engine harness that connects to the emissions harness. I need the colors that they are so I can identify them. Thanks, Mike

Anybody???

Of course - That would be the coolant level sensor.....it's black on the em harness and turns br/w on the engine harness.


later

So how does it connect to the sensor then?? Which sensor is it? The one by the oil pressure sender?

Is there a way to test from the plugs on the emissions harness to idetify which wire it is usung continuity??

The sensor is in front of the filler neck. You use a continuity meter to determine is a wire is intact, or where it goes.

You are beginning to ask questions that raise a flag saying - what are you doing taking the harness apart in the first place if you cannot determine continuity.


LAter

I know how to determine continuity. I have done this stuff. My question was does the wire connect to any of the plugs in the emissions harness or is it just a wire that passes through. I was looking for a connector pin so i could locate the wire in the harness.

My question was does the wire connect to any of the plugs in the emissions harness

NO


or is it just a wire that passes through.

YES




Green manual is a must when dealing with the harness wiring. Do you have yours out and on page Z-44?


Later

yep sure do. i see in the diagram that it goes from br/w to b but the copy i had printed is crappy. I wasn't sure if their was another connection in there going back to the ecu plugs somewhere. So I can just run one wire from the sensor directly to the engine harness then??

Yes, from the sensor directly to the engine harness side, just like the factory schematic shows.


Later