Help! Non-Seq Conversion
 

I'm at the end of the Don't_Be_a_Rikki's non-sequential conversion. However, the last instruction is to:

"Remove the pressure chamber and below this chamber are the 2 solenoids (turbo precontrol & wastegate control). I used the turbo precontrol and plugged the lines to the waste gate control at first but now I have changed it to the wastegate control feels like a better respone to me IMO. Try the precontrol first to see how you like it and if you dont switch them around."

I don't know where the lines are that need to be plugged.

Any help at all would definately be appreciated.

Never mind. I got it.:D

Fix those instructions, man, you RIKKI! :) They jacked me up too.

sorry about the directions but most guys here run pfc's!
so if you dont run pfc's then you do it the other way as stated:bigthumb:

-Ryan

here is a pic
https://www.rx7club.com/forum/attach...&postid=709762