RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Help me with boost problem!!! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/help-me-boost-problem-243586/)

mingkie Nov 19, 2003 03:13 AM

Help me with boost problem!!!
 
my 93 rx-7 has a boost problem. It has a stock twin turbo that boosts up to 14psi.
here is problem! Turbo does not boost at 2nd gear if I have a full boost at 1st gear around 5000rpm. The same thing happens at 3rd and 4th gear.
I hear some metal scraching sound from the turbo when I boost high. Someone told me that is a wastegate problem, but I do not know. Any body knows about this problem? Please help me!

RotorJoe Nov 19, 2003 04:01 AM

I would think you would be able to build boost pressure in any gear as long as you have load on the car. Thats a weird problem.

mingkie Nov 19, 2003 04:10 AM

what do mean by have a load on the car? sorry, I am from Korea. How about the metal scraching sound?
thank you.

RotorJoe Nov 19, 2003 04:17 AM

Metal scratching sounds bad, it could be any rotating part. Does it only make the scratching noise in 2nd gear, where the boost problem is?

Load, I mean as long as the wheels are touching the ground you have load (hell even sping the drivetrain may create enough load to build boost). In neutral you will not build boost, you will build 0 pressure (not in the negative), but it will not go to positive boost pressure.

mingkie Nov 19, 2003 04:52 AM

That sound is very loud. few days ago, I met a blue rx-7 on the high way. We raced for a while about 120mph.
After that we talked a little bit. He said that he could hear the scraching sound from his car. yes, I can hear the sound when I boost high at every grear.
thank you again!

SleepR1 Dec 2, 2003 11:13 PM

Check turbo control solenoid, vacuum chamber check valve. You sure it's metal scratching, and not air whistling? 2nd turbo problem usually points to vacuum chamber check valve or TCA solenoid. If you create a vacuum by letting off of the gas, and reapplying the throttle during your 2nd gear run, the boost should be back (2nd turbo comes online). If this occurs, you have a vacuum leak, TCA solenoid problem, have a vacuum chamber full of oil, or have a leaking vacuum chamber (cracked or bad hose connection).

Follow-up with what the cause and repair was for your boost problem, so we all learn from your experience!

RX-007 Dec 2, 2003 11:27 PM


Originally posted by x605p747R1
Metal scratching sounds bad, it could be any rotating part. Does it only make the scratching noise in 2nd gear, where the boost problem is?

Load, I mean as long as the wheels are touching the ground you have load (hell even sping the drivetrain may create enough load to build boost). In neutral you will not build boost, you will build 0 pressure (not in the negative), but it will not go to positive boost pressure.

A FD makes about 4psi in neautral if you go WOT.


All times are GMT -5. The time now is 08:36 AM.


© 2026 MH Sub I, LLC dba Internet Brands