Help installing pettit intake (pics)
 

Yeah I know its dirty.

Having trouble fitting the seporator in it and finding the tab on the radiator shroud that it is supposed to fit into

Is the seporator supposed to go under the coolant hose? because that is in the way and it doesnt even let me fit the piece in there

so I guess my questions are

Where does the tab on the seporator piece go

and how do I fit that piece in there

http://i18.photobucket.com/albums/b1...n/MVC-004S.jpg

The radiator hose is right under it, according to the pics the front goes on the left side of the fuse box

http://i18.photobucket.com/albums/b1...n/MVC-003S.jpg

Is this piece the right shape (angle)?

http://i18.photobucket.com/albums/b1...n/MVC-001S.jpg

http://i18.photobucket.com/albums/b1...n/MVC-002S.jpg

Where is the radiator shroud where the tab goes?






thanks for the help

I bought it used so I have no directions and the directions I found are only words.

First, that heat sheild its bent to shit.

Your last picture is where it goes- in between the hose and the body and the tab goes on the rad. shroud in the middle.

ok I thought it was bent but didnt know what angle should it be at?

yea shouldnt the heat shield be str8 with a lil cuve to it ??? i mean thats how mine looks like

http://img.photobucket.com/albums/v6...k/DSC03741.jpg
http://img.photobucket.com/albums/v6...jik/Pettit.jpg

That's the best pic I could find of the angle. good luck

ok thanks that helps ill see what I can do

one last question I got the kit installed now what do I do with the hole going to the inter cooler?

Could I just cover it with some mesh grill? Is water aloud to get inside or would I have to create something that makes it so no water gets in?

http://i18.photobucket.com/albums/b1...n/MVC-015S.jpg

You can use a sheet of aluminum or for a cheap temporary solution: duct tape.

Is that the only place air enters through? or is there another hole where the IC gets air?

You just want to cover the hole on the top of the IC duct where it used to send air over to the stock intake.

with what??

Are these black and white photo's or do use your car to haul coal?

Same answer as posted above:

Does anyone know the part numbers for the k and n filters for this kit? Want to purchase these filters locally, not through pettit. Any help is appreciated!

akiratdk made covers.... You might wanna ask him if he still has any or if he plans on making more...
https://www.rx7club.com/showthread.php?t=424184

thanks but i had the racing beat airduct thing so the hole is better and on the side.... thanks for that link tho.....

mahji i didnt want a temp solution i wanted a perm one... ^_^ thanks anyways

The permanent solution is to cover up any holes in the IC duct, that aren't being used, with aluminum sheets riveted to the duct. Same thing I said earlier.