Help identifying connectors behind the dash (if possible)
Hi all,
I've removed my dash as it is getting retrimmed and after doing so, I found so much wiring tucked away that is an absolute mess! I've highlighted the connections and was hoping someone could either confirm I am correct for those I may know and assist with those I don't? For most of the connections, it does look like a complete hack job which I will start to tidy up. No plug matches the connectors so I do think these were bypassed and just not done correctly. 1. Connector for heater/AC from heater core & heater blower (small harness missing) 2. ?? 3. ?? 4. ?? 5. ?? 6. ?? 7. Connector for heater/AC from heater core & heater blower (small harness missing) 8. ?? - Found next to the heater core Thanks for your help https://cimg1.ibsrv.net/gimg/www.rx7...e6d2418d0a.jpg https://cimg2.ibsrv.net/gimg/www.rx7...61231130c1.jpg |
Might be some help http://www.rotaryheads.com/PDF/3rd_g...ng_Diagram.pdf
|
First off, probably helps to state you have a RHD car.
I've pulled and re-installed a dash with a decent amount of time in between the two events so memory was a little foggy. The good thing is the plugs are all different and they obviously have a place to plug in to. Dale |
All times are GMT -5. The time now is 04:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands