RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Help with EGT Tunning (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/help-egt-tunning-279594/)

rob20rx7 03-06-04 07:20 AM

Help with EGT Tunning
 
can anyone suggest what the best egt temp would be to tune for a single turbo 3rd gen. w/

low comp rotors
3mm seal.
street port
720 prim
1600 sec
tso4 turbo
HKS intercooler front mount

right now im running like at 650c to 675c and car is very slugish untill about 5000 rpm then it picks up but i can tell its still rich. Haltech measures about 820 to 875 on the O2 sensor.

thanks in advance
Rob

felix_is_alive 03-06-04 07:59 AM

i have seen temps up to 1000c it will hold but you should definetly NOT pass 1000c , from there on it gets very very dangerous
also where do you have youre probe located , mine was in the manifold


All times are GMT -5. The time now is 03:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands