Greddy Oil Filter Block Adapter/ O2 sensor
 

Sorry, but I mashed two questions in one thread. Does anyone have the Greddy Oil Filter Block Adapter? If so can you plug sensors for the oil temp AND pressure or will it only support one sensor?

I need to install an O2 sensor for my wideband. I've read enough I believe and I'm going to get a bung welded onto my downpipe. Does anyone have preffered placement on where to stick. Has anyone had experiance with this and could maybe shed some light on something I may need to know? Thank you!

I know I seen someone with 2... Idr if they make one or if the person tapped it for an additional sensor

As far as the wideband goes, I put mine all the way back near where the dp meets the mp. When you get the bung installed make sure you put it in the 10 or 11 o' clock position so that you don't get water building up in it. If you're removing the dp now would be a great time to get it ceramic coated.

This makes it easy to run the cable into the cabin via the shifter area. I just drilled a hole, put in a grommet, and ran it through the interior of the tunnel plastics through the dash and to where my wb unit is.

No problem. I got the question on the greddy adapter answered. I found a video on youtube that shows the adapter.

I'm sorry I'm not very familiar with ceramic coating, but why would I want to do that that?