Greddy Airinx Intake and bov fitment
 

Hi guys,

I recently installed a Greddy Airinx Intake kit, however my Apexi bov will not fit due to the spot being occupied by the greddy intake. Which bov will fit cleanly with the Greddy intake kit?

I want to use the hose that's comming off the y pipe for the bov, so mounting it on the ic piping is out of question for me.

Thanks,

Randy

can't you just get a longer hose?

yes i can, but haven't found a good place to mount the apexi bov yet with minimal amount of bending to the ypipe-bov hose.

zip ties are your friend :)

I want to say something about that comment, but I politely restrain my self from doing so :)

where is the greddy bov kit mounted? The one that has a flange which goes in the y-pipe to bov hose.

I am not familiar with the apexi bov mounting kit, but my hks was mounted in the same place and didn't fit too well either, kept making contact with the intake pipes. I had a bracket fabricated to have it sit a little lower and problem solved.

I've also heard of people mounting the bov on the the intake elbow where the aws hose goes.