Fuel line help?
 

Ok so I picked up a great fuel system from a guy here on the forums. Here is what i have so far and then I'll get into what I need. Pump is controlled with aeromotive pump controller.

Walboro pump -> Gurew surge tank-> Aeromotive A1000 pump -> Aeromotive A1000 filter- SS line to Y block-> SS line -> SARX fuel rails -> aeromotive FPR ->

This is where I am left off. I need to go from the FPR to a return line to the surge tank and from the surge tank to the main tank.

So my question is what size lines do you run as your return lines. About how much line do you require (ball park for financial planning) What size line from the surge tank back to the main tank?


Thanks for your input

I think the stock lines are 5/16" which converts to -5 AN, but if you are upgrading might as well go to -6 (do they even make odd number AN?)

20 feet or so of line should be enough. Maybe get 25 to be safe. Always good to have a little extra.

Ok thanks. That's exactly what I needed.