Fuel injector help
 

Hey guys I just ordered a fuel rail kit from cj motorsports. I'm running a 35r with a pfc. I intend to run peak and hold 850 primaries and peak and hold 1600 secondaries with a fjo driver box. Exactly what style (honda type, mitsu type, bosch, denso...) should I be looking for and where are you getting them? I was thinking precision or rc.Sorry for the ignorance but it's been a while!:confused:

Are you asking what style of injectors to look for? Or are you asking about the driver box. If you want to just buy everything in a kit I would recommend the RX7Store.net, They have everything you need. It's where I purchased my Extreme Fuel System kit which included everything. In your case you can just buy what you need i.e. injectors, resistors, and injector clips.

No I'm asking about the injectors sorry for the confusion.

That’s cool; just make sure the ones you get fit. The ones I have in my FD are Ford 160 pound injectors which equals to 1680cc injectors. It’s actually what came in the kit from RX7store.net. I haven't had any problem with them; they work great and are very inexpensive.

I'm told it's top feed bosch. The only problem I have with that ^ is I was told a guy bought that kit, flowed the injectors and they were no where near what they were supposed to be.

The 1680's I use are BOSCH. As for the 850 top feeds I use Seimens... You can get them from Keith at KGparts. I also have the fjo injector driver... :)

Well I went with precision turbo for the injectors.
I got the 84 lb/hr and 160 lb/hr

Fuel Injector Specifications Bitmap

Domestic Performance Fuel Injectors (Top Feed)
Pn-------------Flow------Imped-----Resis---Open ms----Close ms-------Nozzle
041-0840----84 lb/hr---Low---------2Ω------1.130---------0.998-------Ball & Seat
041-1600----165 lb/hr--Low--------2Ω ------1.300---------1.000------- Pintel
Others are rated at 43.5 PSI