RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   fuel hose identification (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/fuel-hose-identification-919013/)

zeeshan 08-23-10 08:07 PM

fuel hose identification
 
1 Attachment(s)
the car's been sitting apart for almost 2 years and i'm putting back the fuel components and i totally forgot which hose is what. can someone identify which one is the vent hose, fuel feed and fuel return?

Attachment 712962

thank you!

zeeshan 08-23-10 08:15 PM

another question -- im moving the fd fuel filter to the front. the 180 degree barb.. is the the fuel in or fuel out? thanks!

-- note to self: mark things!

papsmagu 08-23-10 08:33 PM

vent, return, supply. if you post a better picture i can tell you which one is which but usually the vent on the passenger side of car and supply is drivers side

zeeshan 08-23-10 09:38 PM

hose #1 is closest to the engine,
hose #2 is in the center
and hose #3 is farthest from the engine

zeeshan 08-23-10 09:42 PM

i pulled up the parts catalog and it showed me which is which. phew!

AldenBruh 08-26-10 12:49 AM

care to share the knowledge?

turboIIrotary 08-26-10 12:54 AM

me too!

zeeshan 09-07-10 03:01 PM


Originally Posted by zeeshan (Post 10179443)
another question -- im moving the fd fuel filter to the front. the 180 degree barb.. is the the fuel in or fuel out? thanks!

-- note to self: mark things!


the 180 degree barb is fuel out

the straight barb is fuel in

1 is fuel vapor
2 is fuel return
3 is fuel feed

maarviin 09-11-10 03:38 PM


Originally Posted by zeeshan (Post 10203573)
the 180 degree barb is fuel out

the straight barb is fuel in

1 is fuel vapor
2 is fuel return
3 is fuel feed

:icon_tup: was waiting for this response.

RotaryEvolution 09-11-10 03:45 PM

or in other words:

3 goes to the front of the engine
2 goes to the rear of the engine
1 goes to the top line on the engine rail

jkstill 01-22-15 10:27 AM


Originally Posted by zeeshan (Post 10179607)
hose #1 is closest to the engine,
hose #2 is in the center
and hose #3 is farthest from the engine

If you take a look at the covers on the hoses, you will see dots marking the hoses/pipes as 1,2 and 3.

The markings are the reverse of what is listed. The hose with 3 dots is the one closest to the firewall.

Probably these dots are no longer visible on many cars.

turbojeff 01-22-15 10:31 PM

It is easy, if they cross at all you did it wrong. They just go 90 degrees, no crossing or twisting.


All times are GMT -5. The time now is 11:15 AM.


© 2024 MH Sub I, LLC dba Internet Brands