RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Flooding Problem (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/flooding-problem-261369/)

manatecu 01-16-04 01:23 PM

Flooding Problem
 
I have read several posts but I am still having a problem:

I performed the ATF trick and the motor fires right up but after about 10 seconds it just die's. Sometimes it fires back up but usually it just spins and wont fire.

It is an automatic 93.

Anyone got any advice.

Thanks
Chris

jspecracer7 01-16-04 01:29 PM

mods? What's your idle a/f?

manatecu 01-16-04 01:36 PM

The car is completely stock

ooEfiniRx7oo 01-16-04 07:03 PM

Am I going to flood my fd, if I use a stage 3 M2 ECU on the fd which only has down pipe, RE Amemiya intake with boost of 0.8kg^2cm?:D

mad_7tist 01-16-04 07:06 PM

does it have ok compression? one of the injectors my be leaking do a fuel pressure hold test.

mcfly4001 01-16-04 07:39 PM

check for engine codes

i had a starting problem similar, turned out to be the crank angle sensors were dirty, cleand them off for the heck of it.

new spark plugs? check plugs for spark,

plug wires? check wires for spark

ohm out coil packs for correct resistance.

try deflooding it and cleaning ur plugs.

test fuel pressure. regulated and unregulated.

could be the FPR

could be leaky injector

test as much of this as you can and let us know.

thanks

could be


All times are GMT -5. The time now is 08:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands