RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Finished my Engine swap (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/finished-my-engine-swap-1015148/)

okevin 10-18-12 01:51 PM

Finished my Engine swap
 
hey guys today i finally got my half bridgeport to start (it was flooded, and it got to dark last night to unflood, found the procedure on the forums i appreciate it) well the cars running excessive rich , smells like fuel but its less smoke then the first start, i think i broke the connector on the oil pressure sensor on the driver side near the T spark plug, would that cause the engine to wined down and shut off ? these are the minor little issues i got fix this weekend


-oil cooler line missing a copper washer
-clutch wont come up ( slave cylinder piston prob fell off or came off )
- get the coolant filled
- Cold solder the oil pressure guage sensor back

okevin 10-18-12 02:31 PM

heres a video
First start Rx7 Half Bridge Port - YouTube

djseven 10-18-12 02:38 PM

Oil pressure gauge will not affect how the car runs. Fix all the little issues then start driving the car. Make sure all coolant and oil leaks are resolved.

okevin 10-18-12 02:46 PM


Originally Posted by djseven (Post 11259553)
Oil pressure gauge will not affect how the car runs. Fix all the little issues then start driving the car. Make sure all coolant and oil leaks are resolved.



thanks i appreciate it of-course i will! ill be getting a new fuel system aswell so by the time everythings in, all the minors will be fixed


All times are GMT -5. The time now is 08:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands