Finally uploaded pics of my project TONS of Pics
 

Its about time I share with u all pics of my engine project. let me know what u think.

more

smore

another set

smores

and for the fun of things a pic of me driving my soon to be 1st FC with 93' engine

Whose doing the motor this time?? You?

That's a nice looking FC

yes thats correct I did the port and motor

Did you do the last one that blew up? I can't remember... How severe of a port did you go with?

damn, nice work, sexy FC!

good job!

peter griffin... lmao!!

didnt blow engine, one of the snaps where the coolant seals are broke off and water was leaking in the combustion chamber. I went with a street/race port not to big but not to small.

looks like what I'm about to undergo here in about 2 weeks. What did you paint your irons with?

dupli-color high heat ceramic racing red

looks nice. love the fc. i miss mine now.

Ohh got it. Just a coolant seal problem. So you're using the same motor? Or was this a spare?

I had to get a new front plate for the one that broke. other than that I saved the housings, plates, and rotors. new seals and gaskets etc.

Race Port project done
 

and I'm very have with it rides nice and smooth and not a bad idle, if I do say so myself I thought it be almost as bad as bridgeport.

some more pics.

Nice looking engine bay! How much boost are you pushing? What turbo?

as of now not boost anything, gotta break it in first, but it gonna run 15psi,on a t60-1.

That thing is sick. Congrats on all your work.

What's your philosophy on breaking in? Ask ten people and you'll get ten different answers. Just curious what you plan to do.

very nice ride..like the wheels alot!

pics of the ports?

I have them post in a previous thread. as for the break in change the oil every 500 miles and no boost til I hit 2K miles. and not all 15psi at once a few pounds til I work my way up to 15psi