Finally !!
 

Hi Guys,

I am finally ready to install my SPA dual gauges so I thought I'd ask you guys some ?'s before I get cracking.

1) Where the heck do I put the OIL TEMP sensor ??

2) I am running a lot higher oil pressure than a stock FD's ... My Oil Pressure at WOT is like 120-125 psi ...so where should I put the OIL Pressure sender ??

3) Where is the best location to put the FUEL PRESSURE sender ? I have relocated the filter (earls unit) to the front, using -8 an fuel lines with Cosmo pump and an SX Reg up front....should I just use the fuel pressure gauge spot on the SX pressure regulator ...or should I tap into the fuel line somewhere ..before or after the injectors but before the return line??

TIA,
3G7

purchase racingbeat's oil filter adapter block ...you will have two fittings to use for sensors..
use the outlet of the sx fuel presure regulator....
peace
sean

Thanks a mill !

Any other suggestions...anyone ???