Fd throttle body gaskets/o-ring gaskets?
 

i just got a polished tb and i need to know when i replace the old one can i use the same gaskets? and if not, then where can i get some new gaskets and o-ring gaskets for my FD? thanks

I reused mine but put some petroleum jelly on it, then some high temp silicone and it sealed it very well

I just took my intake manifold off and got it painted/ported/cleaned. I got the TB cleaned also. I ordered a new throttle body O ring and gasket from the Mazda dealership.

how much you paid for your o-ring and tb gasket?

Since this is a different throttle body, I suggest you replace the gasket. The o-ring doesn't need replaced unless it's squashed flat.

Dave

Call up Ray Crowe at Malloy Mazda, 888 533 3400. He owns an FD so you don't need to know part #s, he ships small stuff for free, and he offers club discounts. I can't believe there are still people on this forum who don't know about him :)

It's a trade secret of the older guys. Apparently when someone sells his FD he doesn't pass that information on.

i just called up there and ray wont be back til monday, and the guy who answered the phone didnt really feel comfortable with the info he gave me. i will call back monday when ray gets there.

Dear word! I just ordered a throttle body o-ring from Ray....$17!!!!! That's an expensive piece of rubber/EPDM/viton/silicone/whatever.

The throttle body<=>UIM gasket was only $11 and the UIM<=> gasket, $7.