factory twins????
 

yeah we just put rebuilt stock twins on my car now its not boost'n??? whats up?? any help will be appericated

Thanks

More info would be 'appericated' also. You can't expect a doc to help you without describing your symptoms. All hoses connected?

Probably hoses not connected or connected to the wrong nipples.

Dave

There should be a guide lines for asking questions on the forum. I've seen so many posts where people ask for help and barely explains their symptoms... Like this one.

take some pictures

yeah sorry i was kinda short on the describing the problem. i was in a hurry. let me start by saying i started helping on the project after they had the turbos off and was ready to put the others on so i had no clue what vac lines when where. it was also the first FD i worked on. i also didnt put the vac lines either. im trying to figure out where there suppose to go. so im guessing the vac lines are in the wrong spots but, this is what its doing. first off it has no power. the turbo spools and stuff but makes no boost. driving normal the gauge read between 10 to 5 vac then as you give it gas it goes up to right under 0 even at WOT. thats the best way i can explain it. ill try to get some pics up later if it could help

Thanks

Just set the lines up like this:
http://www.davidgeesaman.com/rx7/93v...lor.edited.jpg

(assuming it's a manual tranny)

Ttiwwp

yeah it a manual