RX7Club.com - Mazda RX7 Forum - Engine Harness Help.....

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Engine Harness Help..... (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/engine-harness-help-699953/)

T2 Tsunami

10-26-07 06:09 PM

Engine Harness Help.....

what is the white harness in center of pic for?, and why won't it match up on my 93 FD(94 Harness)?

http://i243.photobucket.com/albums/f...CONNECTION.jpg

T2 Tsunami

10-26-07 06:27 PM

direct pic.
http://i243.photobucket.com/albums/f...CONNECTION.jpg

T2 Tsunami

10-27-07 06:09 PM

still looking for some help on this. the 2 white connectors in the center do not match up.

RotaryWhat?

10-27-07 09:22 PM

I believe the engine harness for MT & AT are different---might want to start there and see if you got the wrong one. The connectors that plug directly into the ECU are the same between all the years and I think the MT & AT as well, but since that particular connector goes back to a body electrical harness, my guess is that connector and wires are for the transmission.

T2 Tsunami

10-28-07 04:00 AM

has anyone heard of an adapter for this, or do I have to start splicing?, also would the car start and run safely while this harness is unplugged? guess I learned the hard way on this one. damn

Mahjik

10-29-07 12:48 PM

Quote:

Originally Posted by T2 Tsunami (Post 7462827)

has anyone heard of an adapter for this, or do I have to start splicing?, also would the car start and run safely while this harness is unplugged? guess I learned the hard way on this one. damn

Start splicing... You might see if this post has some helpful information:

https://www.rx7club.com/showpost.php...3&postcount=51

All times are GMT -5. The time now is 04:00 AM.