|
"eeeeee" noise when hitting 3k rpm
Since i've replaced all the vacuum hoses earlier last year, i've been getting a "eeeeeee" noise at about 3k rpm. I am not leaking boost according to my boost gauge and the car doesn't feel like it's losing boost.
I remember seeing a thread that this noise could come from the turbo itself when the propeller shaft is having too much play...could that be the problem or is there something I should also look into? thanks. |
do you have a stereo system setup?
|
if it sounds like a sharp beeeeeeee~ noise when you start to boost... my guess would be boost leak from your intake elbow if you removed it during your hose job. take it out and butter up some gasket silicon on top of the rubber ring and reinstall it. see if that helps
if its not a major problem. most likely that's it. happened to me several times. after applying liquid gasket and re-install, its gone |
Originally Posted by RX7LINK
(Post 7776695)
if it sounds like a sharp beeeeeeee~ noise when you start to boost... my guess would be boost leak from your intake elbow if you removed it during your hose job. take it out and butter up some gasket silicon on top of the rubber ring and reinstall it. see if that helps
if its not a major problem. most likely that's it. happened to me several times. after applying liquid gasket and re-install, its gone |
i had this too when the car was running
|
yeah.. i have the greddy elbow too, if anything greddy elbow's worse because it doesn't use the rubber o-ring at all. still need to apply gasket sealer all around everytime i remove it.
when it happens to me, i still get perfect boost pattern, just annoying. almost sound like you hit some kind of warning. its a very minor leak that's why the sound is so high pitch. try it. imo... its a big possibility, if you still hear it after that... umm... :dunno: |
Originally Posted by RE-Mamamia
(Post 7776747)
if it was leaking boost from the elbow I wouldn't get a perfect boost pattern right?
|
Could be a leak from a metal gasket if the sound is very sharp. Like the one used with the air pump switch valve (ACV?).
|
Originally Posted by RX7LINK
(Post 7776882)
yeah.. i have the greddy elbow too, if anything greddy elbow's worse because it doesn't use the rubber o-ring at all. still need to apply gasket sealer all around everytime i remove it.
when it happens to me, i still get perfect boost pattern, just annoying. almost sound like you hit some kind of warning. its a very minor leak that's why the sound is so high pitch. try it. imo... its a big possibility, if you still hear it after that... umm... :dunno: -J |
Tighten all your clamps, Ive had cars that would boost fine but make that same noise. Sounds like the loudest screeching noise you have ever heard. You may have a worn out clamp. Make sure you can tighten them really tight without them backing off or becoming loose. Simple Fix
|
Originally Posted by internal comsucktion engi
(Post 7777004)
That O-ring is IN the TB....
-J |
Originally Posted by RX7LINK
(Post 7777372)
you're right. :p:
|
Spread some liquid gasket around the greddy elbow and viola eeeee noise is gone, thanks guys
|
:) :icon_tup:
|
| All times are GMT -5. The time now is 04:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands