ECU Check Engine Code 20 Oil Metering Pump Question!!!
Hey guys, I installed a few parts like the twin oil coolers, y-pipe and intakes recently and once i was done and connected the battery, the car started, but with the check engine light...pulled the code and it was 2 long flashes meaning code 20, Oil Metering Pump position sensor short something...
Well, with my mods what can be the source of the issue, i know the pump cant be bad because it was fine just before the install, and what determines the position of the pump anyways, i know its driven by the ECU itself and the gear inside the front plate!!! I was told most electronics are inside the pump...so im confused :( Any Ideas? Because I cant figure this out...all the connectors are plugged in no problem!!! |
Start by checking the wiring the pump. Make sure the connection to the emissions harness is good and that you have continuity from the emissions harness down to the pump.
|
All times are GMT -5. The time now is 02:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands