RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   DP and MP on Automatic? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/dp-mp-automatic-292675/)

Nutty RX3 04-09-04 01:37 PM

DP and MP on Automatic?
 
Will putting a down pipe and a mid pipe on a automatic car cause any problems. Thanks

areXseven 04-09-04 02:09 PM

No "unexpected" problems should arise. But you may have to install a boost controller or PFC if your boost gain shoots above 11-12 at WOT , which it probably will.

What other performance Mods have you done, or anticipate doing along with a DP & MP??

ejmack1 04-09-04 02:30 PM

I ran fine when my car was an automatic...

DP, MP, Pullies, Intake, and MBC

rdavidsrx7 04-09-04 02:32 PM

I thought i heard the pfc doesnt work well with the automatics so you may have to have your ecu reprogrammed. DP definetly should be OK, MP will make ya spike though if you have a CB already.

areXseven 04-09-04 02:52 PM


Originally posted by ejmack1
I ran fine when my car was an automatic...

DP, MP, Pullies, Intake, and MBC

I have a Blitz SUS intake w/3" straight through exhaust system & dual tipped Muff. Stock ECU. I was over-boosting to 15 at WOT until I installed a hi-flo cat converter on my MP. That tamed my boost pretty good, with no loss of power, and added a much quiter tone.

areXseven 04-09-04 02:54 PM


Originally posted by rdavidsrx7
.....I thought i heard the pfc doesnt work well with the automatics
You'll lose the "hold" feature on the auto tranny. I don't think it'll compromise anything else.

Fumanchu 04-09-04 07:32 PM

A couple of people have gotten the "hold" feature to work with a PFC. Search or PM "Maxpesce". He knows how to do it.

Nutty RX3 04-11-04 01:28 PM

Thanks for the responce


All times are GMT -5. The time now is 10:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands