DOH!!! Broke Something.
 

I was taking my passenger side tire off to work on some suspension and one of the lug nuts was really really tight. So I decided to give it a little elbow grease. Then I felt it snap. The bolt broke off in the lug. Has anyone done this and if so how do you repair it and what is the cost of getting a new bolt? Thanks in advance.

1. Twist out Stud
2. Order new Stud from Malloy
3. Install new stud.

take your brake rotor off and beat the stud out with a hammer, put a new stud in in the reverse way

You can easily replace the stud on the front, But the rear is vastly different story. The upright will need to be removed and the hub needs to be pressed out. Then you can replace the stud.
1R1

:o:

thanks guys.