RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Cover for Passenger Rear Fender Well (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/cover-passenger-rear-fender-well-39000/)

swbrad 12-15-01 12:49 PM

Cover for Passenger Rear Fender Well
 
I just bought a '93 touring with some fire damage to repair caused by a rotten muffler. After clean-up of the passenger rear fender area that there was quite a bit of rust back where the tire would throw rocks. This did't look like fire damage caused rust as the undercoat was melted away back to steel in places. Also, when you look behind the tire, the muffler heat shield is in view.

Was the car designed with a plastic shield in that area that fell away some time ago? Or, is this just the way it is designed? I can't see any plastic cover shown in the factory manual, but that is not a well documented location.

Thanks for the advice.

Steve Bradley
swbrad@aol.com
Santa Fe, NM
505-983-5125

JConn2299 12-15-01 06:34 PM

No, there isn't a full wheelwell liner on the passenger side like there is on the driver's side. You're not missing anything. I suppose they wanted air to get in there to cool things off. You had an unfortunate way of finding out the need for that.

swbrad 12-16-01 12:10 AM

passenger rear tire well cover
 
Dear JCONN,

Thanks for the information about the fender detail. It does make sense to keep as much air flowing around that muffler as possible.

Steve Bradley


All times are GMT -5. The time now is 06:53 AM.


© 2024 MH Sub I, LLC dba Internet Brands