RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   cooling fans on when ignition is on (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/cooling-fans-when-ignition-921691/)

kgriffin 09-10-10 11:35 PM

cooling fans on when ignition is on
 
usdm 1993 FD
Manual
engine harness was jdm but i fixed the x-05 connector and the brown yellow wire.

ok heres the situation i bought my car as a shell that had an ls1 in it. im bringing it back from ls1. when i turn the key to on position the fans kick on instantly without hitting the start position. ive tested all 4 relays all of them are working fine. I believe i have all the wiring fixed from the ls1 swap.

please help me guys

asianguy02 09-11-10 12:44 AM

Grounds and check the wiring for broken wires for the fans. I had the same issue, and it turned out to be a combination of the two.

GL

red_dragon 09-11-10 02:28 AM

I had similar situation recently. Try and see what happens when you pull out the fan fuse. If the fans don't turn off something is shorting out from main batt power into your fans.

Hotwheelz 09-11-10 06:18 AM

if your ac botton is pressed on and the ac fan knob is on 1-4 then the fans will kick on automatically in the on position

Banzai-Racing 09-11-10 06:27 AM

The last car I had in the shop with this problem had the fan recall harness at the relays but the control box had been removed.

Remove the patch harness at the relays, see if this fixes your problem.

kgriffin 09-11-10 12:48 PM

wow i didnt even think of the ac being on. i will feel pretty dumb if that is the problem. thanks guys ill check it out

RotaryEvolution 09-11-10 01:08 PM

was gonna mention the A/C switch but been covered.

tt7hvn 09-11-10 03:22 PM

when i was messing around with this the last time....i accidentally plugged in the wrong harness to the wrong relay as they all will plug into eachother.....check to make sure the correct harness goes to the correct relay


All times are GMT -5. The time now is 12:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands