RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   coolant loss (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/coolant-loss-327447/)

1 2 NV 07-13-04 08:01 PM

coolant loss
 
ive read a 100 things on coolant loss and my problem seems to point to a internal seal failure which is common. but my real problem is this. every once in a while i go out to the car and the damn thing is plum full. i check it daily and this has been happening lately. i have a AST bypass but other than that its a bone stock FD with 108k on the motor. anyone have a clue what else could b my problem.
recap: loses coolant but every so often after a day of driving its full. answers please????

1 2 NV 07-20-04 07:20 AM

sorry guys, bump this.

Bluem 07-20-04 09:30 AM

it expands when hot

WaLieN 07-20-04 09:36 AM

Do you add coolant to it every so often? If not, then you may have some air in your coolant system (given that you also let it cool down fully). Burp your coolant system.

Howard Coleman 07-20-04 10:01 AM

i had coolant loss a month or so and fixed it using..... what else, the resources here on the forum.

after reading it all i was prompted to go to Autozone and borrow ($75 security fee 100% returnable) their coolant pressure-izer. i run a Pettit AST which uses a cap that is compatible w the test instrument. in other words you pressurize the system by using the AST as the opening. i found i had 2 miniscule leaks around clamps and a tired cap on the AST (don't forget to test it).

if you have ANY LEAKS in the sytem you won't be able to pull a vacuum necessary to recover the coolant pushed into the overflow tank.

you will also be able to diagnose any engine problems.

all for free. thanks Autozone.

howard coleman

lopedl 07-20-04 11:14 AM

do you think its a good idea to try it, if you have a plastic ast?

spurvo 07-20-04 12:05 PM

Coolant system tester is a MUST have tool for this car. No reason to pressurize over 13 lbs, which should be safe for the stock AST, though, really, WTH is that thing still doing on your car? :)


All times are GMT -5. The time now is 05:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands