Code 13 boost sensor
 

I keep getting the code 13 for pressure sensor. I checked it out per the shop manual and ot tests out ok. I can reset the ECU and once I hit near 1 bar is goes back into limp mode. No engine check lite. I'm running the t04s single, PMC with stock ECU on an automatic. Have the wastegate set for 14 # psi.

Does anyone have a good working boost sensor they can lend me to try to completely eliminate my stock sensor ?

Anyone had this trouble ?

Thanks, Tom

We have a few spare stock ones laying around at the RX-7Store. I think you will need a remappable ECU ( PFC ), or remapped stock ECU, to change to a different one, ie. GM 3 bar.

614-771-8966 (Cols. Ohio) Call between 10:00am and 1:00pm or 2:30pm til 6:00pm.