clutch wedged against PP
 

my clutch when I try to disengage it seems like it jams against the pressure plate, any ideas? its a brand new clutch, just put in. it looks like the clutch is off of the flywheel enough to disengage but it doesnt. The pedal moves to the floor and back without much effort at all. Its a 6 puck spex clutch so im confused as to whats going on.

Sounds like you're linkage is not properly connected, or not properly bled.

ill post up some photos of it engaged and disengaged, and see what everyone thinks

YEAA...I got an ACT 6 puck clutch that does the same thing too. After it got stuck to PP, it rubs agains the flywheel, then the flywheel side gone. Then the whole thing stuck together.
6 puck is not good....

This is gone in about 3 months period. Autocross, track and Drift.

This is my 6 puck clutch at the end:
http://www.berudu.com/rx%2D7/photos/...b/DSCN3653.JPG

This is the pressure plate, look nice and smooth.
http://www.berudu.com/rx%2D7/photos/...b/DSCN3655.JPG

This is the flywheel side:
http://www.berudu.com/rx%2D7/photos/...b/DSCN3656.JPG