clutch problem
 

hi iv got a 1994 twin turbo and its been sat for about 2 months now and i got it running again but the clutch went to the floor and wont come back up. iv looked at the fluid and thats fine and i can pull the clutch pedal up but iv still got no clutch. any ideas.thanks

It's your clutch hydraulics, plain and simple. There's only 3 parts - the rubber flex hose going to the slave cylinder, the slave cylinder, or the master cylinder. Get under the car and see where fluid is coming from.

My rubber flex hose failed on me a few months back - takes only a pinhole leak to lose pressure. If the flex hose is what fails, get a stainless braided replacement - they're about $20-30 from Corksport, Rotary Performance, and probably some other shops.

Dale

The clutch has a separate volume for its fluid in the master cylinder reservoir so that you don't lose braking ability if the clutch leaks, so even if the master-cylinder reservoir "looks full," the clutch sub-volume could be empty. If so, as Dale said, something leaked (clutch master, clutch slave, hose) to lose the fluid.

Dave

thanks alot i will have a look and get back to you