What's a good clutch master cylinder to use for a T56 swap?

 

have run a T56 since 2013. Mcleod RST double disc which is wonderful. my experience is do not run anything but a Tilton 6000 hydraulic clutch actuator. i run a 7/8 Tilton short clutch master. i switched to a Magnum F last year for the better 6th gear ratio. love it all.

 

A land cruiser MC works well. It requires a small weld, enlarging the opening in the car, and a few easy parts. I’ve been using this part for about 7 years, also with a McLeod RST and it has been great. Cheap, reliable, and readily available.

https://www.halfspec.com/papers_tutorials.html

I had previously tried the Wilwood 7/8 MC, and it was a POS.