RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Clunking when pressing clutch (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/clunking-when-pressing-clutch-254032/)

hardbodeez 12-23-03 01:39 AM

Clunking when pressing clutch
 
Just like the title says, when shifting, or as soon as I press the clutch after load I hear a clunk from the rear end. I hear the clunk once, and it is gone. When I let off of the clutch or shift it is fine. I have heard that it is my rear main bushings. I was thinking of buying the poly ones from petitt but I think they are like $150 dollars or so. If anyone has any advice on the problem or cheaper bushings, I would appreciate it.
Also, how much of a pain are those bushings to get at?

vosko 12-23-03 10:37 AM

if you get a clunk it might be a cracked PPF, does your shifter move around when you get on the gas and off the gas ?

noon 12-23-03 11:40 AM

I thought it was normal for the shifter to move a tiny bit when you get on the gas.. ie the reason for having a torque brace

drudwn 12-23-03 10:37 PM

I get a clunck just after stopping at a light or sign. I leave the car in neutral and when it is time to go I press the clutch and hear a slight "clunck". It only happens after I've stopped and put the car in neutral after it's been driven in gear. Almost sounds as if pressing the clutch pedal is making the drive shaft turn a little for some reason......

hardbodeez 12-23-03 10:53 PM

No, my shifter seems to be fine. The only time I get it is pressing the clutch in between shifting gears. That makes me think there is an immediate load taken off the rear and it is moving slightly, I guess. The shifter seems to be pretty stable and I have never had a problem powershifting.

Stevey629 12-24-03 12:27 AM

my shifter seems to want to move a little bit when I give it gas, or when Im off it. I also have this "clunk", as well as a "clank" when going slow. What is a PPF? The shifter moves forward when I let off the gas, and back when I give it gas... it moves just a tiny bit, but it moves.

user 9348703 12-24-03 01:06 AM

PPF= Power Plate Frame.

Vosko- meant excessive movement im sure. A little is ok, but not a lot.

Wish I was there to check it out.

Stevey629 12-24-03 04:31 AM

hmm. ok. what exactly is the powerplant frame? sorry if this sounds like a rather shallow question, but I'm curious. I find a new term everyday on this site.

jfxp 12-24-03 02:29 PM

i seem to have the same "clunck" i'm alittle concered now :(

Rotarded 12-24-03 04:01 PM

It could be the pillow ball mounts in your rear suspension. Mine were making noise every time i got on or off the "loud" pedal.


All times are GMT -5. The time now is 10:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands