check out my new motor [BIG PICS]
 

build by Rob Golden at Pineapple Motorsports, with Stage 2 Ports, Stage 3 oil mods, and balancing

you like? i know i do :)

http://rx7.netfirms.com/fd3s/DCP_0103.JPG
http://rx7.netfirms.com/fd3s/DCP_0104.JPG

there must be some mistake...

that's MY engine. :D

soooweeeeet! shrink the pics down to at least 1024 X 768..:)

i probably should have, but i didn't bother to check the size cause everything is huge on this 15" monitor, how's this

http://rx7.netfirms.com/fd3s/DCP_0103sm.jpg
http://rx7.netfirms.com/fd3s/DCP_0104sm.jpg

Cash Money, would you happen to have a pic of the other side of your engine (plug side) ?? I have an oil leak and would like to see exactly where it's coming from. There is an oil line that enters a metal looking tube at the top of the engine (left side) and directly above the first housing's plugs. Thanks man ! ;)

You are going to replace that stock flywheel, aren't you?

did you get new rotor housings?

I have been told that re-using old housing will not work ie. lapping and that the only way to go is to get New housings. What do you think??

yeah i did get new housings, its part of the rebuild, and i think you CAN reuse housing assuming they are in good condition, but its not a good idea and lapping will be a problem

no the flywheel is stayin stock for the time being

you need to re-route your oil meterting lines?