heres the rest of it
http://img241.imageshack.us/img241/2...0016al4.th.jpghttp://img241.imageshack.us/img241/9...0017om2.th.jpghttp://img241.imageshack.us/img241/1...0018ve5.th.jpg http://img241.imageshack.us/img241/5...0019lk4.th.jpghttp://img241.imageshack.us/img241/2...0020me4.th.jpghttp://img241.imageshack.us/img241/5...0021sn1.th.jpg http://img241.imageshack.us/img241/64/pic041fn8.th.jpghttp://img241.imageshack.us/img241/1...c040lq5.th.jpghttp://img241.imageshack.us/img241/5...c042dw6.th.jpg http://img241.imageshack.us/img241/1...c045gs9.th.jpghttp://img241.imageshack.us/img241/3...c051dn2.th.jpghttp://img241.imageshack.us/img241/1...c056hj2.th.jpg http://img241.imageshack.us/img241/3...c062ud6.th.jpghttp://img241.imageshack.us/img241/7...c067gh8.th.jpghttp://img241.imageshack.us/img241/2...m002qc7.th.jpg |
sorry for the first pics, they were taken with a camera phone.
|
you can post up pics of your build up too... this is why i created this thread.
|
i've already got a thread going for my build, just click the link in my sig. i haven't pulled the engine apart yet, but it should be opened up on Tuesday. i've got tons of pics in the thread though.
|
Originally Posted by telum01
i've already got a thread going for my build, just click the link in my sig. i haven't pulled the engine apart yet, but it should be opened up on Tuesday. i've got tons of pics in the thread though.
lmao @ that main crank bolt. those things suck. |
tell me about it! i've got an impact wrench, but it's only rated at 230 lb/ft. i'll be getting a much more powerful one by Tuesday and i'll have another go at it. i'm sure the advice everyone has given will come in handy.
|
1 Attachment(s)
lean fuel mixture + super cold night = zoom-zoom-boom!
https://www.rx7club.com/attachment.p...d=220079&stc=1 |
i only got pics of my motor apart not the build.. next time ill take the motor apart i might be going ls1
http://i9.photobucket.com/albums/a64...P1010037-1.jpg http://i9.photobucket.com/albums/a64...thP7190008.jpg http://i9.photobucket.com/albums/a64...thc474e56c.jpg 200th post :) |
1.3l > 5.7l :D
|
|
Geesh..thats rough man.
|
Originally Posted by shmacklepap
:wallbash: Engine Fire.....
|
^^Nastiest (in a bad way) engine I think I have ever seen. Give it some CPR and bring it back to life!
Nasty (in a good way), bada$$ engine, 1.3 liter V8 eater. |
Yup, $2500, actually not too bad of damage in the engine compartment other than plastics, but already building up a new engine thats almost done
|
That fire damage looks pretty severe. As in, new brake booster, new master cylinder, potentially new brake lines, wiring harneses, etc. Ouch. $2500 for a complete FD though, can't complain about that :)
|
:) I knew it was going to be lotttttss of work, but thats something I enjoy, and I was excited about learning into the Rx7 and how Rotarys work and such, so building it up from the block has been a great learning experience for me
|
Originally Posted by shmacklepap
:) I knew it was going to be lotttttss of work, but thats something I enjoy, and I was excited about learning into the Rx7 and how Rotarys work and such, so building it up from the block has been a great learning experience for me
|
All the parts besides the engine I am missing....so if anyone could help me out with any of these that would be greatly appreciated
|
my buds and i took apart my engine tonight (click the link in my sig). only have a few pics because my wife's camera is being a bastard, but i'll get better pics up tomorrow.
Originally Posted by shmacklepap
All the parts besides the engine I am missing....so if anyone could help me out with any of these that would be greatly appreciated
|
All times are GMT -5. The time now is 03:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands