brass washers for banjo bolts.
 

Started my car and oil is pouring out of the banjo bolt off my oil filter. Can i get new washers from auto or hardware store that will work? It leaks from the one closest to the oil filter.

I know the local Advanced auto parts has them, shouldn't be hard to find

It shouldn't leak much at all - the copper crush washers, even when they're old, should seal very well.

You can re-anneal copper crush washers. Remove them, hold them with some needle nose pliers, and heat them to red hot with a propane torch. This makes them soft again so they'll crush properly. Also make sure the sealing surface is nice and clean.

Dale