Boost Leak - Diagrams + sites?
I have been searching alot regarding my boost problems and i read alot about how helpful this site is http://home.istar.ca/~dvandit/rx7stuff.shtml
EXCEPT it is not there, where could i find the same info? I have found this one incase anyone looks at this http://www.autosportracetech.com/RX-...leshooting.htm Could this be it. Also is there a Diagram that would show where this is: No vacuum to the Turbo Control Solenoid / Actuator is a common failure. This is typically caused by the one-way valve that supplies vacuum to the Turbo Control Solenoid / Actuator through the Vacuum Chamber. The one-way valve will leak, allowing manifold pressure to leak into the vacuum while under boost. I just want to understand as much as I can before I get at it, because I know I will get confused with all the lines. Thanks Ryan |
The autosport site is good. The FAQ sticky has a few links on turbo troubleshooting and diagrams. Check them out.
Good luck. |
All times are GMT -5. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands